Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Northridge Homeowners
When a gate sags, a hinge tears loose, or a weld finally gives out after thirty years of daily use, Northridge homeowners need a repair that will stay repaired. We have been doing exactly that since 1984. Ironworks Gate Co. provides Best Gate Parts & Welding in Northridge, CA including gate parts replacement and structural welding across Northridge, from Porter Ranch to Winnetka, with most hinge, roller, and latch repairs completed in a single visit. Victor Salinas leads our team, and he stands behind every weld and every replacement part with our written 90-Day Done Right Promise.
Call (925) 966-4150 and a live person answers, any hour, any day. We quote the price before work begins, and that is the price you pay.
What Our Gate Parts & Welding Service Includes
Every metal gate eventually needs parts. Northridge summers bake finishes. The dry heat and occasional heavy rain cycles stress welds at the hinge points. When a part fails, the repair is often simple for a shop that knows what it is looking at. Here is what we handle with our Emergency Gate Parts & Welding in Northridge, CA services.
Hinge Replacement
Hinges carry the full weight of the gate, every day, for years. When a hinge wears, the gate drops at the latch side and starts scraping the ground or refusing to close. We remove the old hinge, assess the post and the gate frame for stress damage, and weld in a replacement hinge rated for the gate’s actual weight. On heavier Northridge driveway gates, we often recommend barrel hinges with grease fittings so the next thirty years go a little easier than the last thirty did.
Post Replacement
A gate is only as straight as the post holding it. When a post rusts at the base or shifts in the soil, the gate leans and nothing lines up. We cut out the failed post, set a new steel post in concrete at the correct depth for the gate’s weight and length, and re-hang the gate once the concrete has cured. In Northridge’s clay-heavy soil, proper depth and footing matter more than most people expect, and we size the footing for the gate, not for a guess.
Rail Repair
The top and bottom rails give a gate its shape and keep the pickets from vibrating loose. When a rail rusts from the inside, which is common on older Northridge gates, the gate begins to wobble and the pickets start to work free. We cut out the rotted section, weld in new steel of the same gauge or heavier, and grind the repair smooth so the gate looks like it was never touched. If the rail is too far gone, we replace the full rail and re-secure the pickets.
Custom Welding
Some repairs are not a bolt-on part. A cracked frame, a broken picket, a bent section that has to be cut and rebuilt. Our welding work is done on-site in Northridge, by a technician who welds steel as a trade, not as a side skill. We match the steel type and thickness to the original gate, clean the weld area properly, and finish with a weld that is stronger than the surrounding metal. Victor has spent decades doing this work, and it shows in the finished joint.
Gate Rollers
Sliding gates roll on wheels, and those wheels wear out. Flat spots develop, bearings seize, and the gate starts grinding and jumping instead of gliding. We replace worn rollers with sealed-bearing units sized for the track and the gate weight. The difference after a roller replacement on a Northridge sliding gate is immediate: the gate rolls quieter than it has in years, and the opener stops working so hard. We also provide Gate Parts & Welding in Winnetka for sliding gates in that area.
Latch & Lock
A gate latch that does not catch is a gate that cannot be secured. We repair and replace latch hardware on walk gates and driveway gates across Northridge, from simple gravity latches to keyed locks and electric strikes. If your latch is paired with an access control system, we make sure the new hardware works with the existing opener, so the gate locks and the keypad still opens it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
Over 42 years, we have worked on gates built by every major manufacturer in Southern California. For BFT systems, we keep common replacement parts on the truck, which means a BFT opener problem in Northridge often gets solved in one trip instead of two. We know BFT’s hinge and track configurations well enough to diagnose the problem before we unload the tools.
Linear and Viking openers appear on a lot of Northridge properties, particularly on gates installed in the nineties and early 2000s. Those systems are durable, but the mechanical parts around them, the hinges, the rollers, the tracks, take the daily abuse. We service those mechanical parts and make sure the gate moves smoothly enough that the Linear or Viking motor is not fighting a losing battle. Ghost Controls systems are common on lighter driveway gates, and we repair the gate structure those openers attach to as well as the opener itself. Whether you have one of these brands or any other make, we can help.
Signs You Need Gate Parts & Welding Right Now
- The gate sags or drags. A gate that scrapes the driveway is telling you something. Usually it is a worn hinge or a cracked post. Let it go long enough and the gate frame itself begins to twist.
- You hear grinding or squealing when the gate moves. That sound is metal on metal, often a seized roller or a dry hinge. The longer it runs that way, the more damage it does to the track and the frame.
- The gate wobbles or shakes. A stable gate should move in one plane, smoothly. Wobble means a rail is failing or a weld has cracked. On a heavy Northridge driveway gate, a wobble under power is dangerous.
- Rust is flaking at the base of a post. Northridge’s dry heat does not stop rust. It hides it. Rust at the post base is structural: the post is thinning where the weight concentrates. That is a replacement waiting to happen, and it is cheaper before the gate falls.
- The latch does not catch or the gate will not stay closed. A gate that will not latch is a security failure. Whether you need a latch adjustment or a post realignment, the fix is simple now and expensive after the wind takes the gate.
Our Gate Parts & Welding Process - Step by Step
We keep the process simple because Northridge homeowners have heard enough complicated stories. Here is how a typical welding or parts job works with us.
Step 1: You call, a person answers
No phone trees, no callbacks. Call (925) 966-4150 any time, day or night, and a live person picks up. We ask what is happening with the gate, when it started, and whether it is stuck open, stuck shut, or moving poorly. Based on that, we schedule a visit at a time that works for you.
Step 2: We inspect the gate on-site
We come to your Northridge property and look at the whole gate: hinges, posts, rails, rollers, latch, and the opener if the gate is automated. We check for wear patterns, not just the obvious break. A trained eye sees the hinge that is about to fail, not just the one that already did.
Step 3: We quote the price before work begins
No surprises on the bill, ever. We tell you what needs to be done, what it costs, and how long it will take. You approve the work before a single bolt is turned. If a repair is not urgent, we say so, and we do not push you to do it.
Step 4: We do the repair or welding on-site
Most gate parts and welding jobs are completed in the same visit. We arrive with parts and welding equipment on the truck, so the gate is repaired where it stands. Our technicians are background-checked, uniformed, and they treat your property with the same care they would bring to their own mother’s house.
Step 5: We test, clean up, and hand you the written promise
The gate is cycled several times to confirm it moves correctly. The work area is left clean. You get our 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Our home page has more on how we work, and our Gate Parts & Welding in Granada Hills page covers service in that area if you have family or property there.
How Much Does Gate Parts & Welding Cost in Northridge?
Gate parts and welding costs in Northridge depend on the part, the gate weight, and the extent of the damage. Here are working ranges for the most common jobs we do in the area:
- Hinge replacement: $150-$400 per hinge, depending on gate weight and hinge type
- Post replacement: $300-$800 per post, including concrete footing
- Rail repair: $200-$600, depending on the length of rotted rail
- Custom welding: $150-$500, depending on the complexity of the repair
- Gate roller replacement: $120-$350, including wheel and bracket
- Latch and lock replacement: $100-$300, depending on hardware type
What affects the price: gate weight and size, accessibility to the work area, the condition of surrounding parts, and whether the repair requires new steel or just a part swap. The way to avoid overpaying is to get a firm price before work starts, which we always provide. A free estimate from Ironworks Gate Co. includes a full inspection and a written quote: you know the cost before you agree to anything. We also offer $50 off any repair over $250, and a permanent 5% discount for seniors and veterans.
Gate Parts & Welding Near Northridge - Our Service Area
We work throughout Northridge and the surrounding communities, including Granada Hills, Chatsworth, Porter Ranch, Winnetka, Reseda, Canoga Park, Tarzana, Panorama City, Encino, and Van Nuys. Typical response time in Northridge is one business day for non-emergency welding and parts work, with same-day availability for urgent repairs. Our Gate Parts & Welding in Chatsworth page covers our work in that neighborhood specifically.
Serving Northridge, CA - Our Local Coverage Area
We’re based in the Northridge area and know this community well as your local Northridge Gate Parts & Welding team. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Northridge
Gate parts and welding is the repair discipline that handles the structural and mechanical components of a gate: hinges, posts, rails, rollers, latches, and the welded steel frame. When a part wears out or a weld cracks, we replace the part or re-weld the joint so the gate hangs straight and moves smoothly again. In Northridge’s heat and clay soil, these components take more stress than most homeowners realize.
Most hinge, roller, and latch replacements are completed in a single visit, usually within one to three hours. A post replacement takes longer because the new concrete needs to set before the gate can be re-hung, typically overnight. We tell you upfront how long the job will take and we show up when we say we will.
Most repairs run between $150 and $800, depending on the part and the gate. A simple roller swap is on the low end; a post replacement with a new concrete footing is on the higher end. We quote the exact price before we begin, and that price does not change. Call (925) 966-4150 for a free estimate and a firm number.
Yes. We service BFT, Linear, Viking, and Ghost Controls gate systems regularly in Northridge, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Our experience across these brands means we diagnose the problem correctly on the first visit, whether it is a mechanical part or the opener itself.
A live person answers our phone 24 hours a day, 7 days a week, and we schedule emergency repairs in Northridge as quickly as possible. If a gate is stuck open, stuck shut, or compromised as a security risk, we prioritize that visit. Call (925) 966-4150 and we will get a plan in motion that same day.
Every job we complete is covered by our 90-Day Done Right Promise, in writing. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. We also stand behind the parts we install, and if a manufacturer defect shows up within the warranty period, we handle it.
Clear the area around the gate so we have room to work safely, and if the gate is automated, keep the opener remote handy so we can test the system after the repair. You do not need to remove the gate or do any prep beyond clearing space. We bring the tools, the parts, and the welding equipment.
Schedule Your Gate Parts & Welding Service in Northridge Today
A sagging hinge or a cracked weld does not fix itself, and the longer it goes, the more it costs. Call (925) 966-4150 for a free, no-obligation estimate on any gate parts or welding work in Northridge. A live person answers, we arrive when we say, and the price we quote is the price you pay. We have been doing this for over 42 years, and we stand behind every job in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Northridge since 1984.