Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Tustin
Gate parts and welding in North Tustin usually means one of two things: an old ornamental iron driveway gate that’s sagging off its hinges, or an equestrian gate that won’t roll and the horses need to get through. Most jobs are repair work on heavy steel gates swinging over long concrete driveways, and we’re set up for exactly that. Our crews carry replacement hinges, roller assemblies, post steel, and full welding rigs on the truck, so we can handle most North Tustin callouts in a single visit. If your gate is binding, dragging, cracked at a weld, or pulling away from the post, call (213) 566-7552 and a live person will pick up.
Why Ironworks Gate Co. Is North Tustin’s Preferred Gate Parts & Welding Company
North Tustin isn’t like the rest of Orange County when it comes to gates. The lots are bigger, the driveways are longer, and the gates themselves are heavier than what you see on most tract-home streets in neighboring Tustin. We see 14-foot and 16-foot swing gates as a matter of routine here, along with ranch sliders on steel track and roller systems that get no relief from the Santa Ana winds. Homeowners around Cowan Heights, Lemon Heights, and up near the foothills call us because they know we show up with the right steel and the right parts, not a generic hardware-store patch.
Victor Salinas leads our crews, and the company has been doing this work for over 42 years, founded in 1984. Every technician who steps onto a North Tustin driveway is background-checked, uniformed, and trained on welding and gate hardware before they ever touch a customer’s property. Every job ends with the 90-Day Done Right Promise in writing. If something’s not right, we come back and fix it. No paperwork, no arguing.
- Free estimates with upfront pricing settled before any work starts.
- Most weld and hardware repairs done in one visit, including same-day service when the schedule allows.
- $50 off any repair over $250, and a 5% senior and veteran discount on every job.
- 24/7 live phone support. No voicemail trees. A person answers.
Our Gate Parts & Welding Services in North Tustin
Our Gate Parts & Welding team handles everything from a broken hinge leaf on a pool gate to full post replacement on a 16-foot equestrian swing gate. In North Tustin, the work leans heavily toward the heavy end: ornamental iron driveway gates, estate entry gates, and ranch sliders. Here’s what we do most.
Hinge Replacement
North Tustin’s ornamental iron gates are often decades old, and the hinge bearings wear unevenly under the weight of a gate that may weigh 600 pounds or more. When the hinge pins wallow out or the leaf itself cracks, the gate drops and starts dragging the bottom rail across the concrete. We cut out the old hinge, weld in a new one matched to the gate’s actual weight and swing arc, and shim the gate back to square. Hinge replacement on a standard driveway gate in North Tustin typically runs $280 to $520 per hinge set, depending on gate weight and whether the post is still sound.
Post Replacement
This is the most North Tustin-specific repair we do. Many of the gate posts in this area were poured in the 1970s and 1980s, long before anyone put a heavy electric operator on the gate. The footing is often undersized, and years of wind load and operator torque eventually crack the concrete at grade or push the post out of plumb. We replace the post with new steel set in a properly sized footing, and we weld the gate back to square the same day. Post replacement with concrete work in North Tustin generally runs $650 to $1,400, with the higher end covering oversized equestrian gates and deeper footings on slope lots.
Rail Repair
Bottom rails on swing gates take a beating from wind and from being dragged after hinge failure. Rails crack at the weld joints where the pickets tie in, and once that happens the gate flexes and the crack propagates. We can weld most cracked rails in place without removing the gate, grinding out the old weld and reinforcing the joint with proper gusset plates where the design allows. Rail repair on a standard North Tustin driveway gate runs $180 to $400, and heavier reconstruction work on a large estate gate can go up from there.
Custom Welding
Some gates aren’t worth replacing, but they’re not right as they sit. Maybe the gate needs a wider section for a new horse trailer, or a pedestrian pass-through added, or the original design never had proper diagonal bracing and racks in the wind. Our welders fabricate on site, matching the existing picket style and rail profile so the repair doesn’t look like a patch. Custom welding for a typical North Tustin gate runs $150 to $600, depending on the scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Tustin
Many North Tustin gates still run their original operators, and the brands we see most are Linear, FAAC, and LiftMaster from the 1970s through early 2000s. We’re factory-trained on nine opener brands, including FAAC, BFT, Linear, and Viking, and our trucks carry the parts those systems need, not just the common parts every handyman stocks. When a 1980s Linear on a Cowan Heights driveway gate needs a new limit switch or a board repair, we can usually source and install the part without sending you to a distributor. For Gate Parts & Welding in North Tustin, that older system knowledge matters. Parts supply for 40-year-old operators is getting difficult, and we know which sources still carry what.
Common Gate Parts & Welding Problems We See in North Tustin Homes
North Tustin has a specific set of gate failures that repeat across the community. Here’s what we see most often.
- Santa Ana wind racking. Wind events funneling through the mountain gaps push sustained gusts across these foothill properties, and gates that are 12 feet or wider act like sails. Frames twist, hinge bolts shear, and welds crack at the picket joints. We see this every fall and winter on properties along Foothill Boulevard and the higher streets off Newport Avenue.
- Failed 1970s concrete footings. Many original gate posts on North Tustin’s larger lots were set in footings that were undersized even for a manual gate. Add an electric operator and a few decades of Santa Ana cycles, and the post leans or the pad cracks. Any operator upgrade that skips fixing the foundation fails again within a season.
- Binding slide gates on shared driveways. North Tustin has more than its share of shared driveways and flag lots off streets like La Colina Drive and Arroyo Avenue. Where there isn’t room to swing a gate, homeowners install slide gates, and those rollers, tracks, and rack-and-pinion systems wear out. We replace worn rollers, realign track, and weld cracked rack sections so the operator stops overloading.
- Rust pitting on bare iron gates. The alternating dry Santa Ana air and damp marine layer humidity accelerates rust on uncoated iron faster than homeowners expect. Pitting weakens pickets and rails, especially at weld joints and bottom rails where water sits. We cut out heavily pitted sections and weld in new steel before the gate loses structural integrity.
Pricing for Gate Parts & Welding in North Tustin, CA
Gate parts and welding prices in North Tustin track with the size and weight of the gates in this area, which skew heavier than in most of Orange County. A hinge replacement typically runs $280 to $520. Rail welding and repair runs $180 to $400. Post replacement with new concrete is $650 to $1,400 depending on gate size and footing removal. Custom fabrication work starts around $150 and goes up with scope. What drives the price is gate weight, whether we can weld in place or need to remove the gate, and how much concrete work is involved. We always quote the full price before we start, and the price we agree to is the price on the invoice. Call (213) 566-7552 for a free estimate.
We Also Serve Cities Near North Tustin
Our crews cover North Tustin and the surrounding communities. We serve North Tustin daily, and our service area extends to Irvine, Tustin, Laguna Woods, and Lake Forest. If you’re on the edge of North Tustin near the Irvine city line or off Jamboree Road, give us a call and we’ll get you on the schedule.
Serving North Tustin, CA - Our Local Coverage Area
We’re based in the North Tustin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Tustin
No permit is required for welding repairs to a gate frame or replacing gate hardware like hinges and rollers, since North Tustin is unincorporated and Orange County treats these as ordinary maintenance. Replacing a gate post with new concrete footing may require a permit from Orange County depending on the scope, particularly for driveway gates on county-maintained roads. We handle the permit paperwork when it’s needed and we know the Orange County unincorporated requirements, which are different from those in incorporated Tustin. Call (213) 566-7552 and we’ll tell you what applies to your specific project.
Equestrian gates in North Tustin are typically 14 to 16 feet wide and built heavy, so the hinge bearings carry more weight than standard hardware is rated for. Add decades of Santa Ana wind loading and the hinge pins wallow out, the leaves crack, and the gate starts dragging. Most original hinges on 1970s and 1980s North Tustin gates were residential-grade hardware that was never meant for a gate this size. We replace them with heavy-duty bearings matched to the actual gate weight, and the 90-Day Done Right Promise covers the work in writing.
Yes, in most cases we weld a cracked ornamental iron gate in place without removing it. Our welders grind the crack clean, bevel the edges, and weld with proper penetration, often adding a gusset plate or backing bar where the design allows. This is the fastest way to get a North Tustin gate back in service, and it usually runs $180 to $400 depending on the length of the crack. Call (213) 566-7552 for a free estimate on your specific gate.
Binding on a North Tustin slide gate is almost always worn rollers, a bent or debris-filled track, or a misaligned rack and pinion. On dirt or decomposed-granite driveways common on equestrian properties, dirt and hoof debris pack into the track and chew up rollers faster than on paved surfaces. We replace the rollers, clean and realign the track, and weld cracked rack sections so the gate runs straight. The operator stops fighting the gate, and the motor lasts longer. Call (213) 566-7552 for an exact quote. Estimates are free.
Entrapment protection on automatic gates is required by UL 325 and California building code because a moving gate can seriously injure someone if it closes on them. When we weld or replace gate parts, we verify that the photocells, safety edges, and reverse mechanisms are working after the work is done. If the gate is old enough to need welding, its original safety system is often damaged or disabled, and that’s a real hazard, especially on North Tustin shared driveways where pedestrians and kids pass through. We won’t leave a gate running without functioning entrapment protection.
Call Ironworks Gate Co. for Gate Parts & Welding in North Tustin
If your gate is sagging, cracked, binding, or pulling off its post, we’ll come look at it and give you a straight answer and a written quote. We’re the Gate Parts & Welding team North Tustin homeowners call when they want it done right and backed in writing. Serving Cowan Heights, Lemon Heights, and all of North Tustin, with a live person on the phone 24 hours a day. Call (213) 566-7552 now for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Tustin and surrounding Orange County communities.