Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Orange
Gate installation in Orange runs $2,800-$8,500 for a standard driveway system, and we typically complete most single-gate jobs in one visit once materials arrive. If you live in Old Towne, Santiago Hills, or anywhere across ZIP codes 92856, 92857, and 92859, we know your street’s houses and your gate’s likely failure points. Call (213) 566-7552 and a live person answers, day or night. We quote the price before any work starts and we put our 90-Day Done Right Promise in writing.
Ironworks Gate Co. has been doing this work for over 42 years, founded in 1984. Victor Salinas leads our crews, and every technician who shows up at your Orange home is background-checked, uniformed, and works like they’re working on their own mother’s house.
Key Takeaways
- Most driveway gate installations in Orange complete in one visit once materials are on hand.
- Old Towne gate replacement can trigger historic design review. We handle that paperwork.
- Santa Ana winds rack swing gates off their posts. Our hinge post work fixes this properly, not cosmetically.
- Price is agreed in writing before a single bolt is turned.
Why Ironworks Gate Co. Is Orange’s Preferred Gate Installation Company
Orange homeowners call us because the gate on a 1920s Craftsman or a 1990s Santiago Hills estate doesn’t behave like a gate in Anaheim or Santa Ana. The soil, the wind, the age of the house, the historic rules. We’ve worked enough properties along Chapman Avenue, Glassell Street, and out east near Santiago Canyon Road that we know what Orange’s housing stock demands before we even arrive.
Our local reputation is built on the jobs we’ve done in Villa Park-adjacent neighborhoods and in the Santiago Hills area, where stucco-pillar driveway gates from the 1980s and 1990s constantly battle aging circuit boards and moisture-corroded hardware. Homeowners there don’t want a handyman guessing. They want a gate specialist who knows all nine major opener brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s the difference between a repair that lasts two months and one that lasts twenty years.
When you call, a live person answers. Not a voicemail, not an answering service. We dispatch to Orange from our Los Angeles office, and crews serve Orange locally. We’ll give you a window we actually hit, because we know what it costs a homeowner when a gate is left open or half-hung.
Every job we’ve done in Orange carries the same written guarantee: the 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard on every gate we touch, the 400th job gets the same care as the first.
Our Gate Installation Services in Orange
Our Gate Installation team handles the full scope: custom fabrication, operator installation, underground loops, keypads, and intercom wiring. Here’s what we most often install in Orange.
Driveway Gate Installation
Orange has a sharp split in housing stock, and it shows at the driveway. In Old Towne, you’ll find narrow driveways with original wrought-iron or wood-post gates that need period-sensitive work. In Santiago Hills and east Orange, wide stucco-pillar driveways hold heavy steel sliding or swing gates, often automated. We measure, custom-fabricate, and install both, with operators sized correctly for the gate’s weight and your usage pattern. A driveway gate that’s too heavy for its operator fails early. We don’t let that happen.

Pedestrian Gate Installation
Pedestrian gates in Orange take a beating from the same Santa Ana winds that strip hinges off swing gates. We install pedestrian gates with deeper hinge posts than code minimums because we’ve seen too many gates lean after the first big wind season. On Old Towne properties, we match the existing ironwork profile so the new gate looks like it was hung in 1910, not bolted on last week. For homes adding a keypad or intercom, we run the conduit and wiring during installation so you don’t end up with surface-mounted cables running across a historic wall.

Sliding Gate Installation
Sliding gates are common in east Orange where driveways slope or where a swing gate would swing into traffic. The critical part is the post footing. Underground operators in hillside homes fail from moisture intrusion into the post footing, causing intermittent operation. We pour footings deeper than the minimum and seal the canister so water can’t pool around the motor. A sliding gate that binds on its track is almost always a footing problem, and we fix it at the root.

Swing Gate Installation
Swing gates are the most popular residential gate in Orange, and the most vulnerable to Santa Ana wind events. The wind funnels through the passes east of the city and hits hillside properties near Santiago Canyon especially hard. We see gates where the frame has been racked off its hinge posts so badly the panel looks fine but the gate sags six inches. We fabricate heavier hinge barrels, set posts deeper, and add reinforcement gussets so the gate survives the next wind event instead of sagging again.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Orange
We’re certified to install and program operators from DoorKing, Elite, and LiftMaster, along with six other major brands. When we install a gate in Orange, we stock the common parts for these brands on our trucks, so we’re not running back to a supply house mid-job. That matters when your driveway gate is half-hung and the sun’s going down. We also carry linear actuators, photocell kits, and loop detectors sized for the gate widths common in Santiago Hills and the custom properties around Villa Park.
Common Gate Installation Problems We See in Orange Homes
- Santa Ana wind racking. A gust event east of Santiago Canyon Road can push a swing gate frame off its hinge posts. The gate sags even though the panel is new. We replace the hinge post, set it in a deeper concrete footing, and reinforce the frame at the hinge stile so the next wind doesn’t do the same thing.
- Historic ordinance conflicts in Old Towne. Homeowners bolt a standard tubular-steel panel over a historic masonry pillar, and city staff flags it because the Historic Preservation Ordinance requires period-appropriate materials and style. We fabricate ironwork that matches the existing profile and manage the design review paperwork so the permit doesn’t stall your project.
- Underground operator moisture failure. In east Orange hillside homes, water leaks into the post footing and shorts the operator. The gate works intermittently, then not at all. We install sealed canisters, add drainage, and reposition the operator so water can’t reach the motor.
- Bottom rail rot on wood gates. Low humidity from Santa Ana winds causes wooden gate boards to gap and check. Moisture from sprinkler overspray then collects at the bottom rail. We see rotted bottom rails on wood gates throughout Old Towne and the 1980s tracts. When we install, we use ground-contact-rated lumber or steel, and we keep the bottom rail off grade so air can circulate.
Field note from our crew: At a Craftsman home in Old Towne off Chapman Avenue, we replaced a sagging wrought-iron pedestrian gate by first digging out a rotted hinge post, setting a new steel post in a concrete footing, and fabricating a matching cast-iron hinge barrel on-site because the original hardware hasn’t been manufactured in decades. We paired it with a LiftMaster gate operator with safety photocells and a keypad entry, then tuned the underground loop detector so the gate opens smoothly for cars without cycling on pedestrians. That’s the job done right, not patched. And it’s a good example of why Gate Installation in Orange is different from the kind of work you’d get from a general contractor who drives in from Santa Ana.
Pricing for Gate Installation in Orange, CA
A standard pedestrian gate installation in Orange runs $1,200-$3,500 depending on ironwork, keypad entry, and footing depth. A single swing driveway gate with operator typically lands between $4,500 and $8,500. Sliding gates run higher, usually $6,000-$12,000, because the track, footing, and motor coordination are more involved. Custom ornamental ironwork in Old Towne can push a project to $10,000 or more when we’re matching period hardware and fabricating pieces on-site.
What drives cost in Orange specifically: historic review compliance in Old Towne, wind reinforcement on Santiago Canyon-facing properties, and the occasional need to weld or cast custom hinge barrels because the original hardware hasn’t been commercially manufactured in decades. Whatever the number, it’s in writing before we begin. No surprise invoices. Call (213) 566-7552 for a free estimate.
We Also Serve Cities Near Orange
Our crews work throughout Orange and the surrounding area. That includes Villa Park, Tustin, Santa Ana, and Irvine. If you’re in any of those cities and need gate installation, the same crew, the same written promise, and the same live phone support apply. One number, 42 years of craft.
Serving Orange, CA - Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Orange
Yes, if you’re replacing a gate on a property inside the Old Towne historic district, the city’s Historic Preservation Ordinance can require a design review, and that review mandates period-appropriate materials and style. This applies to gate replacement, not just repair. We’ve worked enough Old Towne properties to know what city staff will accept, and we handle the paperwork as part of the installation. Call (213) 566-7552 and we’ll walk you through whether your project triggers review.
Because Santa Ana wind gusts funnel through the passes east of Orange and rack the gate frame off its hinge posts. The panel may be fine, but the hinge post has shifted or the bolts have stripped. We fix it by setting a new steel post in a deeper concrete footing and reinforcing the gate frame at the hinge stile. The fix is permanent, not a bolt-tightening exercise. Estimates are free.
Yes. We install keypads, intercoms, and cameras on ornamental gates throughout Orange, including Old Towne properties. The wiring can be run through the gate frame or underground so there are no surface-mounted cables. We coordinate the gate operator, the entry hardware, and the camera angle so the system works as one unit. Call us for an exact quote.
Automatic gates in Orange must comply with UL 325 safety standards, which require at least two methods of entrapment protection. That typically means photocells and a reversing mechanism or contact edges. We install and test safety edges on every automatic gate we put in, and we check them during seasonal tune-ups. Our $89 Seasonal Tune-Up includes a full safety check. Call (213) 566-7552 to schedule one.
We cut out the rotted section of the bottom rail, fabricate a matching replacement piece from steel or iron, weld it in, and repaint to match the existing finish. In Orange’s low-humidity wind conditions, wood gates dry out and crack, then sprinkler moisture collects at the bottom rail and accelerates rot. We keep the new bottom rail off grade and use materials that won’t wick moisture. Free second opinions on any written estimate if you want a second set of eyes.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Orange and surrounding communities since 1984.





Before
After
Before
After
Before
After